Just like cell phone batteries, car batteries can also run out of power when dry. That's why you need to know how to repair a dry battery in anticipation if you experience this problem.
The battery is one of the most important parts of a vehicle that functions to store energy for motorcycle and car engines.
Both types of dry batteries and wet batteries, both require a special fluid to function.
Well, along with its use, battery water can dry up and make the vehicle's electrical function hampered, and then it can make the vehicle not work.
You should know how to repair a dry battery properly so that your vehicle does not have problems later.
Therefore, let's look at some ways to repair dry and soak batteries that are easy to do below.
Tools Needed to Repair Dry Battery
Before getting into how to repair a dry battery, there are some important equipment that you must prepare, such as:
- Minus screwdriver and plus screwdriver to open the battery
- Kitchen knife or any type of knife. Saws can also be replaced. Tape to glue the battery
- Injection to fill the battery water
- Used rags to clean battery water drops
- Dry and wet rechargeable battery water (zuur)
How to Easily Fix a Soaking Dry Battery
Here are the steps to repair a dry soak battery that you can easily apply:
1. Remove the battery from its place
If all the tools and materials are ready, you can immediately try how to repair this soaked dry battery.
First, remove the battery from the box on your motorcycle or car.
The method is quite easy, you can start by removing the positive (+) pole first then followed by the negative pole (-).
This is done so that there are no sparks caused by touching the negative pole (-) with the metal on the vehicle.
2. Clean the battery with a rag
The battery used in the vehicle will definitely get dirty along with the duration of its use.
Therefore, you need to clean the battery with a dry cloth or a slightly dampened cloth to remove all the dirt.
You can also clean the inside of the dry battery with hot water so that the scale and dirt on the inside can be removed and the battery function will return to normal.
3. Open the Battery Cover with a Saw Screwdriver
After the battery has been disassembled and cleaned, look for the parts that have the "Do Not Open" label on the battery body.
Then, use a screwdriver or knife to open the "Do Not Open" section on the top, side, and back of the battery cover.
Remember, how to repair this dry battery needs to be done carefully so that the cover and battery box are not damaged.
4. Fill the Battery Water (Zuur) to Full
The next way to repair a dry battery is that you just need to refill the battery water (zuur) in the six available battery holes.
Make sure you fill the battery according to the needs of the motorbike or car. Not more or less.
5. Perform Battery Performance Test
The last step is to test the performance of the battery that has been refilled with battery water (zuur) and has been fully recharged.
You need to note how much voltage it was before the water was repaired and what the voltage was after the battery was repaired.
If the battery voltage after repair is not the same or even lower, it means that the battery is still damaged.
6. Use Jumper Cables
The next way to repair a dry battery can be by using a jumper cable.
This tool is generally owned by vehicle owners. If you don't have one, you can get it at the nearest auto shop.
However, you will need the help of another vehicle to do this trick.
7. Use a Transformer Charger
The last way to repair a dry battery is to use a tool called a transformer charger.
For those of you who don't know, a transformer charger is a tool that is shaped like a transformer machine and generates electricity to repair the battery.
This tool will really help you in filling a dry battery automatically.
Dry Battery Care Tips So It Doesn't Soak
A soaked battery will certainly be very inconvenient. For that, do a number of tips on caring for dry batteries so they don't soak following:
- Check the condition of the battery regularly
- Clean the battery regularly
- Warm up the car
- Pay attention to the battery charging process
- Don't turn on the AC when the engine is off